| Risk Free Guarantee |
|
| DualSky 90A Brushless Heli |  XController FeaturesNiCd/NiMH(Cells/V)
LiPo(Cells/V) | 5-36, 7.2-43.2V
2-12, 7.4-44.4V | | Max Output | 90amps
(120A surge) | | BEC | OPTO | Weight
(with wires) | 4.41oz
(125g) | | Dimensions | 3.54x2.17x0.79in
(90x55x20mm) |
How to use progcard for 90A HV ESC, steps as following:Connect 4.8V-6.0V power to the battery connect pin of ProgCard. Connect the signal wire of XC9036HV to the BEC connect pin of ProgCARD. Connect the drive power of XC9036HV for ESC. After the above 3 steps are setted,ProgCARD begin to work.
|
 |
Dualsky / Flighttech ESC |
These speed controllers come with an On/Off switch which enables the speed
controller when closed. Which means you must either use the switch or make
up a loop to permanently enable the speed controller. If you do not plug
in the switch you have some weird behavior where the motor will operate, but
quickly slow down and switch off. |
|
|
|
Featured Brands
|
I
want a quote on how much freight it will cost to send items to me.
Download Programming Guide
