The Power 160 is designed to deliver clean and quiet power equivalent to or surpassing the power of a 160-size 2-stroke glow engine for sport and scale airplanes weighing 12- to 20-pounds (5.4- to 9-Kg), 3D airplanes up to 15-pounds (6.8-Kg), or models requiring up to 2700 watts of power.
It provides excellent power for the popular 27% scale aerobatic models such as the Hangar 9 Extra 260, scale performance for the Hangar 9 P-47D Thunderbolt 150 ARF, and extreme performance for models like the famous Ultra Stick Lite EFLM4160A Features- Equivalent to or surpassing the power of a 160-size 2-stroke glow engine for 12-20 lbs (5.4-9 Kg) airplanes
- Ideal for 3D airplanes up to 15 lbs (6.8 Kg)
- High torque alternative to inrunner brushless motors
- Includes mount and mounting hardware
- External rotor design for better cooling
- High quality construction with ball bearings and hardened 8mm steel shaft
- Includes two 12mm prop shaft adapters tapped out for 10-32 threads
- Ideal for models requiring up to 2700 watts of power
EFLM4160A Specifications- Type: Brushless Outrunner
- Size: Equivalent to or surpassing the power of a 160-size 2-stroke glow engine
- Bearings or Bushings: Ball Bearings
- Wire Gauge: 13
- Recommended Prop Range: 18x8 to 20x10
- Voltage: 33.3 - 38.4
- RPM/Volt (Kv): 245
- Resistance (Ri): .03 ohms
- Idle Current (Io): 1.45A @ 10V
- Continuous Current: 60A
- Maximum Burst Current: 78A (15 sec)
- Cells: 28-32 NiMh/NiCd or 9s-10s LiPo
- Speed Control: 85-110A High Voltage Brushless
- Weight: 650g (23.0oz)
- Overall Diameter: 63mm (2.50 in)
- Shaft Diameter: 8mm (.30 in)
- Overall Length: 64mm (2.50 in)
EFLM4160A Need to Complete- 85A-110A HV Brushless ESC
- 9S- 10S Li-Po or 28 - 32 Cell Ni-MH/Ni-Cd
- 18x8 to 20x10
Hardware is included with the purchase of this motor. Recommended Accessories
|
 |
Converting To Electric Flight |
| *Conversion may require some minor airframe modifications along with
installation of motor mount and motor, electronic speed control,
battery tray and battery packs. We also recommend a separate BEC or
battery pack for larger models. |
|
Examples of Airplane Setups: NOTE: All data measured at full throttle. Actual performance may vary depending on battery and flight conditions. Hangar 9 Ultra Stick 40 ARF (HAN1675 / HAN1690) Option 1: | Amps | Volts | Watts Input | Watts/Pound | RPM | | 51.5 | 14.4 | 745 | 128 | 8250 |
Expect very strong performance with very short take off rolls and a great balance of thrust and top speed. Average duration is approximately 15-20 minutes depending on throttle management. Option 2: Motor: Power 46 60 Amp DualSky DSXC6018BA Prop: APC 13x8E Battery: Sanyo RC-3000HV 14-Cells (7-Cell packs x2 in series) Flying Weight w/Battery: 6.7 lbs
| Amps | Volts | Watts Input | Watts/Pound | RPM | | 44.0 | 13.4 | 590 | 89 | 7950 |
Expect good performance with a good balance of thrust and top speed. Average duration is approximately 5-7 minutes depending on throttle management | 
I
want a quote on how much freight it will cost to send items to me.
Download EFLM4046A 0.46 Outrunner Manual
View Determining a Model's Power Requirement Article
![[EFLM4160A] Power 160 BL Outrunner Motor, 245Kv - Ideal for 160-size sport and scale airplanes weighing 12-20 lbs (5.4-9 Kg), 3D airplanes up to 15 lbs (6.8 Kg), or models requiring up to 2700 watts of power.](eflite_pic/EFLM4160A-450a.jpg)
