Hitec HS-525BB Servo

The HS-525BB servo was specifically designed for helicopter applications. Being able to take the vibration that helicopters produce is essential and the HS-525BB is up to the task. This servo is also suited for aircraft as well.

Hitec HS-525BB Specifications

• Operating Voltage: 4.8-6.0 Volts
• Operating Temperature Range: -20 to +60 Degree C
• Operating Speed (4.8V): 0.17sec/60° at no load
• Operating Speed (6.0V): 0.13sec/60° at no load
• Direction: Clockwise/Pulse Traveling 1500 to 1900usec
• Current Drain (4.8V): 8mA/idle and 250mA no load operating
• Current Drain (6.0V): 8.7mA/idle and 280mA no load operating
• Motor Type: 5 Pole Ferrite
• Potentiometer Drive: Indirect Drive
• Bearing Type: 1 Ball Bearing and 1 Oilite Bushing
• Gear Type: All Nylon Gears
• Connector Wire Length: 11.81" (300mm)
• Dimensions: 1.56" x 0.77"x 1.41" (39.8 x 19.8 x 36mm)
• Weight: 1.56 oz. (44.5g)

	[HRCHS5258BB] - Hitec’s HS-525BB Ball Bearing Standard Servo for helicopters & aircraft Download Hitec Servo Manual