Hitec HS-5985MG Servo

The HS-5985MG Digital Coreless Ultra Torque servo is designed to withstand the stresses of larger scale high performance aircraft or on and offroad vehicles. The case top has been improved with 2 Brass Axial Bushings for greater strength and stability to insure longevity and smooth rotation. The HS-5985MG also features a coreless motor for excellent resolution and centering along with the added holding power and programmability of the Hitec Digitals. The HS-5985MG replaces the HS-5945MG.

Hitec HS-5985MG Specifications

• Control System: +Pulse Width Control 1500usec Neutral
• Required Pulse: 3-5 Volt Peak to Peak Square Wave
• Operating Voltage: 4.8-6.0 Volts
• Operating Temperature Range: -20 to +60 Degree C
• Operating Speed (4.8V): 0.16sec/60° at no load
• Operating Speed (6.0V): 0.13sec/60° at no load
• Stall Torque (4.8V): 144 oz/in. (9.6kg.cm)
• Stall Torque (6.0V): 172 oz/in. (12.4kg.cm)
• Operating Angle: 45 Deg. one side pulse traveling 400usec
• 360 Modifiable: Yes
• Direction: Clockwise/Pulse Traveling 1500 to 1900usec
• Current Drain (4.8V): 5.3mA/idle and 400mA no load operating
• Current Drain (6.0V): 6.6mA/idle and 500mA no load operating
• Dead Band Width: 4usec
• Motor Type: Coreless
• Potentiometer Drive: Indirect Drive
• Bearing Type: Dual Ball Bearing
• Gear Type: 3 Metal Gears and 1 Resin Metal Gear
• Connector Wire Length: 11.81" (300mm)
• Dimensions: 1.55" x 0.78"x 1.48" (39.4 x 20 x 37.8mm)
• Weight: 2.18oz. (62g)

	Download Hitec Servo Manual     [HRCHS5985MG] Hitec HS-5985MG - metal gear digital programmable servo is both fast and flexible.