ParkZone Typhoon 2 3D

Parkzone Typhoon2 3D PNP

If you are a 3D pilot who loves the convenience of a ready-to-fly, but wants to use your own transmitter, receiver, batteries and charger, the Typhoon 2 3D Plug-N-Play (PNP) is the plane for you!

You will need:

The only things you need to get the Typhoon 2 3D PNP up in the air are your transmitter, receiver, battery pack, and charger!

ParkZone’s Typhoon™ 2 3D is for experienced RC pilots who want the thrills of unlimited action in an electric park flyer without the hassles of building one. Equipped with oversized control surfaces and a powerful ParkZone™ BL400-15T brushless motor and digital metal gear servos, it can perform the most aggressive 3D maneuvers imaginable with laser precision and power to spare. Hovers, harriers, torque-rolls, waterfalls—the Typhoon 2 does them all. The removable side force generators can be attached with just eight screws. And because the wings and fuselage are molded from ParkZone’s super-strong, feather-light Z-foam™ material, it can handle the punishment of these high-energy 3D aerobatics without getting bent out of shape.

The Typhoon 2 3D Plug-N-Play allows for the convenience of a Ready-To-Fly and the versatility of an Almost-Ready-to-Fly. In order to complete the Typhoon, your customers will need: transmitter (4 channel minimum), receiver, battery and charger. Then, after attaching a propeller, the Typhoon 2 is ready to perform their favorite 3D maneuvers.

Typhoon 2 3D Specifications:

• Wing Span: 39.4 in (1000mm)
• Overall Length: 36.6 in (935mm)
• Flying Weight: 26 oz (740 g)
• Motor Size: BL400-15T brushless, gear reduced
• Servos: 3-wire digital servos
• CG (center of gravity): 3.50 in (95 mm) back from the leading edge of the wing
• Speed Control : E-Flite(R) 25A brushless ((EFLA1025) included)
• Recommended Battery: Minimum 3-cell 1800mAh Li-Po battery (not included)

	[PKZ4375] ParkZone Typhoon 2 3D - If you are a 3D pilot who loves the convenience of a ready-to-fly, but wants to use your own transmitter, receiver, batteries and charger, the Typhoon 2 3D Plug-N-Play (PNP) is the plane for you!

	Note: Comes in a 4 pack		Sanyo AA alkaline batteries - 4 in a pack

	[DSBXP22003SL] 2200 mAh 11.1V (16C) Super Light (SL) Series LiPo. 30C burst current capable. 14AWG wiring. Capacity 2200mAh Weight 167g Size (mm) 100x33x21 Cont Current 35A Max Current 66A (30 sec)

More Photos

	[PKZ4375] ParkZone Typhoon 2 3D - If you are a 3D pilot who loves the convenience of a ready-to-fly, but wants to use your own transmitter, receiver, batteries and charger, the Typhoon 2 3D Plug-N-Play (PNP) is the plane for you!