| Risk Free Guarantee |
|
|
Schulze ISL6 - 430de | | Device Type | isl 6-430d | | Cell count (@ 1.65V/cell) | 1 - 30 | | Capacity [~Ah] | 0,1 - 4 | | min. charge currents [~mA] | 100/250 | | max. charge currents man./auto[~A] | 5.0 / 5.0 | | Charge performance (@ 34V) [~W] | 155 | | Charge performance (@ 50V) [~W] | 125 | | @ 6V (~4 cells) [~A] | 2.7 | | @ 9V (~6 cells) [~A] | 5.0 | | @ 11 - 26V (~8-16 cells) [~A] | 5.0 | | @ 34V (~20 cells) [~A] | 4.5 | | @ 40V (~24 cells) [~A] | 3.5 | | @ 45V (~27 cells) [~A] | 2.9 | | @ 50V (~30 cells) [~A] | 2.5 | | Safety cut-off time about | 3h (4h) |
Pack 1 Output (Akku1) lead-acid and lead-gel batteries: | Device Type | isl 6-430d | | Voltage | 2, 6, 12, 24 V | | Capacity from | 1 Ah | | Charge currents from-to [A] | 0.25-4 | | Trickle charge | few mA |
(Linear) Discharge stage: Lead- and Ni-Cd / Ni-MH batteries| Device Type | isl 6-430d | | Discharge currents from-to [~mA] | 25-2000 | | max. loss performance [~W] | 16 | Pack 2 Output (Akku2) isl 6 /
A 13.8 V power supply voltage is necessary to charge the maximum rated cell count. | Device Type | isl 6-430d | | Ni-Cd / Ni-MH cells | 1 - 6 | | Lead acid cells | 1 - 4 | | Lithium-cells | 1 - 3 | | Capacity from [~mAh] | 50 | | Charge currents [~mA] | 100-500 | | Safety cut-off time [~h] | 9 |
General:| Device Type | isl 6-430d | | Weight [~g] | 1100 | | Dimensions [~mm] | 207x151x68 | | Supply voltage | 11 - 15.2 V | | Low voltage warning | 11.25 (10.5)V | | Low voltage cut-off | 10.75 (9.75)V | | Max. supply current [~A] | 17 | | Idle current [~mA] | 200mA | | Fuse (pack 1 output) | M 16 A | You may require the following to
build charger leads for your
applications
| [EFLAEC312] E-Flite EC3 Charge
Lead w/12"" wire and Jacks, 16 GA wire and EC3 male conn |
|
| [GRP3021] Rx charge lead - suit Multi Lader
|
|
| [GRP3022] Tx charge lead - suit Multi Lader
|
|
| [GRP3036] Charging leads w/M4 gold bullett
connectors |
|
| [DLR2000] 4mm banana Plugs |
|
DualSky Accessories
| [DSAWG12] Dualsky red & black
12G silicon wire (1 metre each) |
|
| [DSAWG14] Dualsky red & black
14G silicon wire (1 metre each) |
|
| [DSAWG16] Dualsky red & black
16G silicon wire (1 metre each) |
|
| [DSAWG20] Dualsky red & black
20G silicon wire (1 metre each) |
|
| [DSMIC2PIN] Dualsky 2 pin micro style
plug/socket (1 pr) |
|
| [DSGC2MSET] Dualsky 2.0mm gold connectors (3
pairs of male female shrink tube/bag) |
|
| [DSGC3.5MSET] Dualsky 3.5mm gold connectors
(3 pairs of male female shrink tube/bag) |
|
 |
[DSJSTSET] 3 pairs of male
female JST 12cm wire/bag
|
|
|
Featured Brands
|
From:
Mathew
Sent:
Wednesday, 17 August 2005
Subject: FW: Thank you note for
promt service.
Just writing to say thanks for such
speedy and helpful service. I
ordered over the phone on Tuesday
afternoon and my order was at the
door on Wednesday morning. (I'm in
Melbourne) Everything I ordered
seems to be in tip top shape and for
the amount of postage it is actually
quicker than driving around
melbounre. (Since Ive had no luck
getting what I want even after
trying 3 hobby shops) The swallow
charger is amazing, Ive always just
charged bateries with basic cables
straight from the car battery to the
nicad or nimh but since i also got a
lipo i needed the special charger
and i wish I had bought one years
ago! so simple so stress free!
Thanks Guys
Matthew
Melbourne
|
|