Raptor 90SE Helicopter

Mr.Taya, the first F3C Helicopter World Champion, designed this helicopter to be the highest quality model helicopter in the RC hobby industry for modelers who love building and flying model helicopters

• Full Length of fuselage: 1410mm (55.50")

• Full width of fuselage: 190mm (7.50")

• Total height: 465mm (18.25")

• Main rotor dia: 1640mm (64.75")

• Tail rotor dia: 260mm (10.25")

• Gear ratio: 1:8.45:4.65

• Full equipped weight: 4800g (10.5 lbs)

All the features that made "Raptor" a household word in the R/C helicopter world are incorporated in the 90 size version. Any pilot can really appreciate the pleasure of flying in 3-dimensional space. Its docile handling is ideally suited for begginers.The stable hover and agility also make it the top choice for contest fliers and extreme 3-D pilots.

Thunder Tiger has incorporated all the state-of-the-art technology into designing and making this helicopter. Which includes a Unique Sideframe System, Bell-Hiller Mixing Control Unit and a Shaft Drive Tail Rotor which has the same aluminum torque tube system as the Thunder Tiger/Taya Imperio helicopter. Using a modern Computer Aided Design to design and manufacture the Raptor 90. High Performance Thunder Tiger PRO-90H ring engine and muffler are recommended.

• Raptor 90 SE comes complete with silver anodized aluminum tail pitch slider for positive tail authority
  Metal clutch bearing case w/3 bearings for high performance flying

• Rear carbon servo tray for direct tail response

• Metal grips

• Metal flybar control arm

• Carbon fiber collective pitch arm

• Metal upper/lower bearing block

• Cyclic ratio adjustment for smooth F3C or extreme 3-D

• Metal washout base for smooth solid collective inputs

• Metal elevator control arm

• Aluminum swash plate for enhanced control response

• Metal main rotor hub with button head

• Metal side frame stiffener

• Carbon base plate strengthens frame assembly

• Metal cooling fan

• Includes 11 and 12 tooth pinion gears

• Carbon graphite collective control arm set

• Carbon side frames both upper/lower

• Carbon tail fins vertical and horizontal

• Carbon tail drive shaft

• Carbon tail boom for use with Thunder Tiger 710mm blades

• Carbon tail boom supports

• Aluminum tail pitchfork

• Main tank holds 550cc of fuel

• Header tank included for consistent engine runs

• Colorful decal scheme that is easy to see both on the ground and in the air

• Radio Set - Transmitter (6 or more channels), High Speed/Torque Servo x5, Receiver, Battery,Switch Harness, Gyro.

• Engine - Heli engine (90 size), Glow Plug, Glow Fuel (15% - 30%), 1.5V Glow Starter, 12V Fuel Pump, 12V Battery, 12V Electric Starter, Extended 6mm Hex (starting tool), Remote Glow Plug Extension Glow Plug Wrench, Foam, Rubber Band.

Raptor 90 Spare Parts